Generating a certificate if you do not have one

If you do not have a certificate, follow the procedure that corresponds to the certificate type you choose to generate:

• Creating a PKCS12 certificate
• Creating a JCERACFKS certificate

Both certificate types are self-signed certificates.

Creating a PKCS12 keystore

Follow these steps to generate a PKCS12 keystore:

1. Configure the PKCS12 setup section in zowe.yaml
2. Run the command to generate a PKCS12 keystore

Configure the PKCS12 setup section in zowe.yaml

To assist with updating zowe.yaml, see the example yaml for scenario 1: Use a file-based (PKCS12) keystore with Zowe generated certificates in the article Certificate configuration scenarios.

For PKCS12 certificate users, customize the following parameters in the zowe.yaml file:

Parameter	Description
zowe.setup.certificate.pkcs12.directory	Specifies the directory where you plan to store the PKCS12 keystore and truststore. This is required if zowe.setup.certificate.type is PKCS12.
zowe.setup.certificate.pkcs12.lock	Is a boolean configuration to tell if we should lock the PKCS12 keystore directory only for Zowe runtime user and group. Default value is true.
zowe.setup.certificate.pkcs12 (Optional)	Defines name, password, caAlias and caPassword to customize the keystore and truststore. It is recommended to update these values from the default values. Note: Alias names should be all in lower case.
dname (Optional)	Specifies the distinguished name. Domain names and IPs should be added into certificate SAN. If the field san is not defined, the zwe init command uses zowe.externalDomains.

Configuring the zowe.yaml file for a PKCS12 certificate
The following zowe.yaml example generates the following artifacts:

• A PKCS12 certificate, specified in zowe.setup.certificate.type.
• A keystore directory /var/zowe/keystore, specified in zowe.setup.certificate.pkcs12.directory.
• A certificate name (or alias) localhost, specified in zowe.setup.certificate.pkcs12.name.
• A certificate authority name local_ca, specified in zowe.setup.certificate.certificate.pkcs12.caAlias.

Example zowe.yaml using PKCS12:

zowe:
  setup:
    certificate:
      type: PKCS12
      pkcs12:
        directory: /var/zowe/keystore
        lock: true
        name: localhost      # Optional, default value is localhost.
        password: password   # Optional, default value is password.
        caAlias: local_ca    # Optional, default value is local_ca.
        caPassword: local_ca_password  # Optional, default value is local_ca_password.
      dname:                # Distinguished name for Zowe generated certificates. All optional.
        caCommonName: ""
        commonName: ""
        orgUnit: ""
        org: ""
        locality: ""
        state: ""
        country: ""
      validity: 3650
      san:
        - dvipa.my-company.com
        - 12.34.56.78

Tip: To get the san IP address, run ping dvipa.my-company.com in your terminal. Please note that dvipa.my-company.com is an example address.

Run the command to generate a PKCS12 keystore

After you configure the zowe.yaml, use the following procedure to generate the PKCS12 certificate.

1. Log in to your system. In this example, run ssh dvipa.my-company.com with your password. Please note that dvipa.my-company.com is an example address.

2. Run the following command in the directory with this zowe.yaml in the terminal to generate the certificate and update the configuration values in the zowe.yaml file.

   zwe init certificate -c <path-to-your-zowe-configuration-yaml> --update-config

The following command output shows the generation of a PKCS12 keystore using the default values, and has the following associated artifacts. (Note that some detailed output messages have been omitted.)

• The CA is created.
• The keystore is created and the CA is added to the keystore.
• The certificate is created and is added to the keystore.
• The truststore is created.
• Directory permissions are changed to restrict access to the private key.

Command output:

#>zwe init certificate -c <path-to-your-zowe-configuration-yaml> --update-config
-------------------------------------------------------------------------------
>> Creating certificate authority "local_ca"
>> Certificate authority local_ca is created successfully.
-------------------------------------------------------------------------------
>> Export keystore /global/zowe/keystore/local_ca/local_ca.keystore.p12
>> Keystore /global/zowe/keystore/local_ca/local_ca.keystore.p12 is exported successfully.
-------------------------------------------------------------------------------
>> Creating certificate "localhost"
>> Certificate localhost is created successfully.
-------------------------------------------------------------------------------
>> Export keystore /global/zowe/keystore/localhost/localhost.keystore.p12
>> Keystore /global/zowe/keystore/localhost/localhost.keystore.p12 is exported successfully.-------------------------------------------------------------------------------
>> Export keystore /global/zowe/keystore/localhost/localhost.truststore.p12
>> Keystore /global/zowe/keystore/localhost/localhost.truststore.p12 is exported successfully.
-------------------------------------------------------------------------------
>> Lock keystore directory /global/zowe/keystore
>> Keystore directory /global/zowe/keystore is locked.
-------------------------------------------------------------------------------
>> Update certificate configuration to <path-to-your-zowe-configuration-yaml>

- update "zowe.certificate.keystore.type" with value: PKCS12
...
- update "zowe.certificate.pem.certificateAuthorities" with value: /global/zowe/keystore/local_ca/local_ca.cer

>> Zowe configuration is updated successfully.

#>

The zwe init certificate command generates a certificate based on zowe.yaml values in the zowe.setup.certificate section. The certificate values used at runtime are referenced in the zowe.certificate section in the zowe.yaml file. The command zwe init certificate -c <path-to-your-zowe-configuration-yaml> --update-config updates the runtime zowe.certificate section to reference the generated certificate generated from the zowe.setup.certificate.

3. Open the zowe.yaml file to check the references to the newly generated certificate values as shown in the following code snippet:

Updated zowe.certificate section in zowe.yaml:

  certificate:
    keystore:
      type: PKCS12
      file: /var/zowe/keystore/localhost/localhost.keystore.p12
      password: password
      alias: localhost
    truststore:
      type: PKCS12
      file: /var/zowe/keystore/localhost/localhost.truststore.p12
      password: password
    pem:
      key: /var/zowe/keystore/localhost/localhost.key
      certificate: /var/zowe/keystore/localhost/localhost.cer
      certificateAuthorities: /var/zowe/keystore/local_ca/local_ca.cer

4. (Optional) For details about the certificate you generated, run the following command:
   keytool -v -list keystore localhost.keystore.p12 -storetype PKCS12

For more information about additional commands to manage a keystore, see the keytool documentation.

Next steps after PKCS12 setup

When using a Zowe-generated certificate, you will be challenged by your browser when logging in to Zowe to accept Zowe's untrusted certificate authority. Depending on the browser you are using, there are different ways to proceed. See next steps about how to import the PKCS12 certificate to your brower.

Creating a JCERACFKS certificate

Use the following procedure to configure the zowe.yaml file for JCERACFKS certificates:

1. Configure the JCERACFKS setup section in zowe.yaml
2. Run the command to generate a JCERACFKS certificate

To assist with updating zowe.yaml, see the example yaml in Scenario 3: Use a z/OS keyring-based keystore with Zowe generated certificates in the article Certificate configuration scenarios.

Configure the JCERACFKS setup section in zowe.yaml

For JCERACFKS certificate (z/OS key ring) users, customize the following parameters in the zowe.yaml file:

Parameter	Description
zowe.setup.certificate.keyring.owner	The key ring owner. This parameter is optional and the default value is zowe.setup.security.users.zowe. If this parameter is not defined, the default value is ZWESVUSR.
zowe.setup.certificate.keyring.name	Specifies the key ring name to be created on z/OS. This parameter is required if zowe.setup.certificate.type is JCERACFKS.

The following zowe.yaml example generates the following artifacts:

• A JCERACFKS certificate, specified in zowe.setup.certificate.type.
• A key ring named ZoweKeyring specified in zowe.setup.certificate.keyring.name.
• A certificate with the label localhost specified in zowe.setup.certificate.keyring.label.
• A certificate authority with the label localca specified in zowe.setup.certificate.keyring.caLabel with a common name Zowe Service CA.

Example zowe.yaml file using a JCERACFKS certificate:

zowe:
  setup:
    certificate:
      type: JCERACFKS
      createZosmfTrust: true
      keyring:
        name: ZoweKeyring   
        label: localhost   # Optional, default value is localhost.
        caLabel: localca   # Optional, default value is localca.
      dname:   # Distinguished name for Zowe generated certificates. All optional.
        caCommonName: ""
        commonName: ""
        orgUnit: ""
        org: ""
        locality: ""
        state: ""
        country: ""
      validity: 3650
      san:
        - dvipa.my-company.com
        - 12.34.56.78

Notes:

• Alias names should be all lower cases.
• The name and lables shown above are the default value in zowe.yaml.
• dname for distinguished name is all optional.
• Domain names and IPs should be added into certificate SAN. If the field san is not defined, the zwe init command will use zowe.externalDomains. The value for the san parameter presented in the example is for demonstration purposes.

Run the command to generate a JCERACFKS certificate

After you configure the zowe.yaml, use the following procedure to generate a JCERACFKS certificate.

1. Log in to your system. In this example, run ssh dvipa.my-company.com with your password.

2. Run the following command in the directory with this zowe.yaml in terminal to generate the certificate and update the configuration values in zowe.yaml.

   zwe init certificate -c <path-to-your-zowe-configuration-yaml> --update-config

   When the command is run, a customized JCL member name is created in the CUST.JCLLIB data set. The PDS name is defined in the zowe.setup.dataset.jcllib property. In the following example output, the PDS meember USER.ZWEV2.CUST.JCLLIB(ZW101431) is created that contains the security manager commands, and then submitted as a job ID: ZWEKRING(JOB03054).

The following command output shows the generation of a JCERACFKS certificate using the default values. Note that some detailed output messages have been omitted.

Command output:

#>zwe init certificate -c <path-to-your-zowe-configuration-yaml> --update-config
-------------------------------------------------------------------------------
>> Generate Zowe certificate in keyring

>>>> Modify ZWEKRING
    - IBMUSER.ZWEV2.CUST.JCLLIB(ZW101431) is prepared
>>>> Submit IBMUSER.ZWEV2.CUST.JCLLIB(ZW101431)
    - Job ZWEKRING(JOB03054) ends with code 0 (COMPLETED).
>> Certificate is generated in keyring successfully.

-------------------------------------------------------------------------------
>> Update certificate configuration to <path-to-your-zowe-configuration-yaml>
>> Zowe configuration is updated successfully.

#>

Tips:
As shown in the example, the job ends with code 0. There may, however, be failures in the individual steps. It is advised to check the job output. The security manager commands in the job are generated based on the value of zowe.security.product. Job steps for each product can be determined by the security manager.

3. Open the zowe.yaml file to check the references to the newly generated certificate values. Because the --update-config parameter was specified, the runtime configuration section of zowe.yaml is updated to match the values to the generated keystore, certificate, and certificate authority. The updated section is shown in the following code snippet:

Updated zowe.certificate section in zowe.yaml:

zowe:
  certificate:
    keystore:
      alias: localhost
      password: 'password'
      file: safkeyring://ZWESVUSR/ZoweKeyring
      type: JCERACFKS
    truststore:
      type: JCERACFKS
      file: safkeyring://ZWESVUSR/ZoweKeyring
      password: "password"
    pem:
      key:
      certificate:
      certificateAuthorities: safkeyring://ZWESVUSR/ZoweKeyring&localca

Note:

• zowe.certificate.keystore.password has a hardcoded password value. However, if you are using type: PKCS12, the password field must be the real password.

Next steps after JCERACFKS setup

For more information about how to use your JCERACFKS certificate, see Use JCERACFKS certificates.